Sicame UK Limited ENERGY IS OUR BUSINESS
  • Insulators for Utility Distribution and Rail

  • Electrical Safety Equipment

  • LV / MV Mechanical Connectors

  • Underground Resin Cable Joints

Tel: +44 (0)1322 444500 / E-mail: sales@sicameuk.com

Sicame UK Limited, Unit 4A, London Medway Commercial Park, James Swallow Way, Hoo, Rochester ME3 9GX

Welcome to Sicame UK Limited, a division of Sicame Group, based in Pompadour, France.

Sicame UK designs and manufactures a wide range of electrical distribution equipment that is used throughout the electrical distribution and supply industry. Our products are used across the globe by a number of electricity supply utilities, satisfying their demanding and onerous requirements on many varied network designs and in wide ranging climatic conditions.

Sicame UK possess a quality management system accredited to ISO 9001:2015. In addition the company is fully approved with supply chain specialists Achilles for UVBD, Verify and Supply Line (Ireland), together with Link-up, for manufacturers and suppliers of equipment to the rail industry. Sicame UK holds network rail approval for its large range of polymeric insulators to replace traditional glass or porcelain overhead line equipment. All of our products are fully tested to British or harmonised European or IEC standards.

Documents and Notices

UK modern slavery act compliance and anti-slavery statement central register

Cable Jointing Kits

Multicore - Industrial

A new range of in-line joints for jointing armoured / un-armoured, multi-cored 0.6/1kV and 1.9/3.3kV XLPE/PVC cables. Supplied complete with mechanical connectors to cover 1.5 to 400mm² cable cores.

Multicore - VO Hazardous area

A new range of in-line joints for jointing armoured / un-armoured, multi-cored 0.6/1kV and 1.9/3.3kV XLPE/PVC cables in areas where there is a danger of gas, sewage, oil or chemical spillage.

Cable Joint Shells

New Sicame UK universal heat shrink joints are designed for the in-line jointing of 3-core SWA PILC and 3-core SWA Polymeric cables with either stranded/solid, aluminium/copper cable cores.

LV/MV Mechanical Connectors

LV Service Joints

A comprehensive range of in-line connectors designed to joint all types of service cable cores (stranded/solid, circular/sector, aluminium/copper) from 4mm² to 35mm².

LV Mains/Service Joints

This complete range of product allows for the in-line jointing of a full range of LV cable cores with, in the majority of the range, the ability to joint in one or two services. The majority of these mechanical connectors come complete with either a flexible dip moulded shroud or 'snap on' polypropylene shroud for insulation purposes.

LV Mains Straight and Branch Joints

This complete range of product allows for the in-line jointing of a full range of LV cable cores with, in the majority of the range, the ability to joint in one or two services. The majority of these mechanical connectors come complete with either a flexible dip moulded shroud or 'snap on' polypropylene shroud for insulation purposes.

LV Terminations (lugs and connectors)

SED offers a wide range of mechanical lugs for the termination of a wide range of different cable cores with typically 'off set' pads for connection to bus-bar, studs etc.

LV/MV Stop Ends

Jointing Accessories

Transition Washers

A product designed to enhance and maintain the electrical contact between smooth surfaces of dissimilar materials eg. bolted terminations onto bus bars etc.

Consumer Earth Bonds

This range of product provides the mechanism for protective multiple earthing by providing a reliable connection to the lead sheath of existing paper insulated (PILC) service cables.

Earth Connector Kits

Armour Bonding

The 'Hepworth' armour bonding system is a mechanical method for the provision of electrical continuity across joints using either steel tape or steel wire armours (SWA) cables.

Temporary Continuity Bonding

A comprehensive range of temporary continuity connections (TCC) designed to maintain electrical continuity across breaks in metallic armour/sheathing during jointing in both the electricity, gas and water supply industries.

Jointing Tools

Cable Jointing Tools

An extensive selection of jointing tools for a variety of functions to assist the jointer during the cable jointing process including core separators, hack-knives etc

Shear Screw Tooling

Tooling for use with the SED Mk1 universal multi-shear screw system ensuring that it provides a quick reliable connection onto the cable core whilst shearing flush with the body of the connector. Sockets can be provided to suit both the 17mm AF hexagon and ½" sq. drive as well as the complete insulated or un-insulated ratchet spanner.

LV Underground Distribution

Link Boxes

An underground 2 Way Link Box assembly for 70 - 300mm² 3C Waveform CNE and 4C Waveform cables including mechanical enclosure, frame and cover(s).

Cable Accessories

LV/MV Resin filled Joints

The unique patented WT Henley Moulded Insulation Resin Protected Joint, has been developed over the years to become perhaps the simplest to install and the most reliable medium voltage cable jointing system available today.

Polyurethane Resin Compound

W T Henley has developed and manufactures a range of Polyurethane Resin Compounds, primarily intended as a filling medium for both LV and MV Cable Joint boxes and terminations.

Re-enterable Compound

Supplied as a 3-part mix, this product is designed as a temporary cable joint repair where customers have a requirement to re-enter the joint, which is typically within 72 hours.

Electrical Stress Control Mastic

A pliable self amalgamating tape for electrical stress control, void and gap filling for MV power cable accessory applications. High permittivity and low loss tangent gives the mastic excellent stress controlling properties.

Plastic Compound

Designed as a general purpose non-hardening, water resistant mastic void filler, this compound is especially suitable for electrical installation work with rubber or polythene cables, where it may be necessary to protect parts from moisture or fumes.

Polymeric Insulators

Stand Off Insulators

11, 24 and 33kV Insulators, incorporating WT Henley's unique EPDM cladding material on a strong GRP rod.

Insulators for OEM's

Our dedicated polymeric applications team are capable in taking design concept through to the production stage. We have the ability to produce OEM polymer components in both EPDM and Silicone.

Railway and Light rail Insulators

A reliable Rail network requires reliable insulators at its heart and although many new designs have been added to our ever expanding range over the years, the formulation of our EPDM has never changed and our reliable service history continues to be one of our greatest assets.

Low Voltage Fusegear

House Service Cutouts

Insulated Connector Boxes (Henley Blocks)

Our Connector Boxes are all designed to accept copper conductors, whist types 2 and 3 can also be used with aluminium.

Heavy Duty Cutouts

WT Henley has designed and manufactures a choice of 2 four pole insulated Heavy Duty Cutouts. Designed to accept BS 88 'J' type fuse-links, both these products are suitable for use with stranded / solid copper or aluminium conductors with conductors from 95 - 300mm².

ABC Boxes

Slim-line, compact model designed for wall or pole mounted options, manufactured from a UV stable flame retardant glass filled nylon, the box fully meets the requirements of BS 7656 / ENATS 43-14.

Overhead Service Cutouts

Rising Service Boxes (Multiway Service Heads)

Our range of Multiway Service Heads provide a safe and reliable means of supply/isolation for subdivided properties such as blocks of flats or large house conversions.

Multi Service Pillars

Typical applications include, groups of domestic housing, holiday homes and parks, mobile and static caravan parks, agricultural and animal housing.

Street Lighting Cutouts

WT Henley has a choice of two slim-line single phase models, incorporating either a single pole or double pole switching action. Both of these are manufactured from glass reinforced flame retardant materials, designed to be robust yet lightweight, incorporating a low force lever release system.

*for all enquiries please email sales@sicameuk.com or visit a subsidiary site for further information*

.::. © copyright 2023 Sicame UK Limited. registration no. 3319466 -- cookies & privacy.::.

www.sicameuk.com uses cookies. read about cookies & your privacy or agree and dismiss notice.