LV Terminations (Lugs)

SED offers a wide range of mechanical lugs for the termination of a wide range of different cable cores with typically 'off set' pads for connection to bus-bar, studs etc.

ML1, 2 & 3 aluminium

The ML range of mechanical lugs has been designed as a practical alternative to crimping or sweating methods. Terminations can be jointed using simple hand tools. The bolted connection to the busbar can be accurately located before the conductor is finally secured. The mechanical lugs have been short circuit tested.

aluminium

Datasheet

ML4/1, 4/2, 4/9 & 4/10 brass forgings

The ML4 range of mechanical connectors are designed for the termination of stranded/solid, circular/shaped conductor cores. The mechanical lugs are manufactured in copper alloy and suitable for jointing either copper or aluminium cored conductor.

brass

Datasheet

ML4/12, 4/13 & 4/14 brass forgings

The ML4 range of mechanical connectors are designed for the termination of stranded/solid, circular conductor cores. Also used for the termination of earth screens of 11KV polymeric conductors. The mechanical lugs are manufactured in copper alloy and suitable for jointing either copper or aluminium cored conductor.

brass

Datasheet

ML5 aluminium

Termination of solid cored conductors.

aluminium

Datasheet

ML6 aluminium

Termination of solid cored conductors.

aluminium

Datasheet

ML7 aluminium

The ML7 mechanical lugs are manufactured from an aluminium forging, thereby providing an integral moisture block. The lugs utilise the patented 'universal' range taking shear bolts.

aluminium

Datasheet

ML7/SH aluminium

The ML7 mechanical lugs are manufactured from an aluminium forging, thereby providing an integral moisture block. The lugs utilise the proven shear head technology with direct contact onto the cable cores thereby removing the requirement for a pressure pad.

aluminium

Datasheet

ML8 aluminium

The ML8 mechanical lugs are manufactured from an aluminium forging, thereby providing an integral moisture block. The lugs utilise the patented 'universal' range taking shear bolts.

aluminium

Datasheet

ML10/SH termination

The Sicame ML10/SH mechanical lugs are manufactured from an aluminium bar thereby providing an integral moisture block.

aluminium

Datasheet

NML aluminium

The NML range of mechanical lugs has been designed as a practical alternative to crimping or sweating methods. Terminations can be jointed using simple hand tools. The bolted connection to the busbar can be accurately located before the conductor is finally secured. The mechanical lugs have been short circuit tested.